English
9
NOTE:
●
Once the ePod
TM
Battery is plugged in, the LCD display
on it shows white light for 10s. If the ePod
TM
battery is
charging, the battery icon will flash for a few seconds.
●
The dry storage & ePod
TM
battery compartment should be
closed when not in use.
●
If the cooler is not used for a long time, install the terminal
cover back with screws.
Solar Panel
NOTE: Only operate with ePod
TM
Battery.
1. Open the solar input socket cover.
2. Insert the plug from solar panel into the solar input socket.
(Fig. 18)
Fig. 18
Control Panel Function
Power On/Off
To turn on the cooler
, touch and hold "Power" key for 1
second, the buzzer will sound, the control panel will display
the mode and previous temperature setting.
USB ports 1,2,3
and wireless charger are activated for charging your device.
NOTE:
The LCD screen shows "
ECO
" for the initial start up of
the cooler.
To turn off the cooler
, touch and hold "
Power
" key again
for 1 second, the buzzer will sound, and the cooler turns off.
The compressor, LCD display, USB and wireless charger will
shut down. However, if ePod
TM
battery is still inserted and
the cooler still connected to power supply or solar panel, the
device will still charge.
Mode Selection
●
Press Mode key to select cooling mode following the
sequence:
ECO > Beverage > Freezer > USB.
●
Select the ECO, Beverage or Freezer modes, the
temperature settings are automatically set to their default
values.
●
Use "
/
" to increase/decrease temperature, the
cooler enters in Manual mode and does not turn back
to the ECO, Beverage or Freezer modes even if the
temperature is adjusted to their default values.
●
To turn back to the cooling mode (ECO, Beverage or
Freezer), press Mode key to reselect.
●
Temperature setting will flash for 2 seconds before
displaying the actual temperature.
Mode
Displayed Default
Temperature
Range
Function
ECO
ECO
46°F
(8°C)
/
Saving Power:
Freezer or Beverage
Beverage
Beverage
43°F
(6°C)
/
Cooling Beverages
Freezer
Freezer
7°F
(-14°C)
/
Freezing Items
USB
USB
USB ports and Wireless charging function
only, ePod
TM
battery quick charging activated,
Cooling disabled.
Manual
"Not
Displayed"
/
-8°F ~ 50°F
-22°C ~ 10°C
Full Range Setting
/
Touch "
/
" to cycle through the available temperature
range for the Manual mode. Stop cycling on desired setting
to select temperature. Temperature setting will flash for 2
seconds before displaying the actual temperature.
Touch "
" to toggle between Fahrenheit and Celsius. Stop
at the desired setting to select the temperature unit.
Loss of Power Memory Function
If there is a loss of power, the system will resume with the
same settings prior to the interruption as soon as power is
restored.
Expanded Function *ePod
TM
Battery Only*
Power Level Display
When the ePod
TM
battery is plugged in the cooler, the battery
icon will indicate the actual battery level.
The battery icon is divided into 4 sections, each of them
indicates 25% of the ePod
TM
battery capacity.
When there is no ePod
TM
Battery plugged in or the ePod
TM
battery plugged in has no power, the battery icon will not
display.
Deep ECO Mode
A Deep ECO Mode is available to extend the battery run time
when using the ePod
TM
battery power source.
Deep ECO can be activated only when the device is powered
by the Furrion ePod
TM
battery. To activate Press “
” and "
" together for 3 seconds.
The LCD screen displays "d" + "ECO" symbol and lights off
in 5 seconds. The temperature setting range of this mode
is 30°F ~ 46°F (-1°C to +8°C) and the default temperature is
46°F (8°C).
When the cooler is in Deep ECO Mode, only the compressor
is in operation and the “
”, “
"and "
"
keys are active.
The USB or wireless charging function will not be available
and the Mode and Power On/Off keys will be disabled.
To exit this mode, there are two options to choose:
−
Remove the ePod
TM
battery and DC/Solar power input;
−
Press “
” and "
"
keys at the same time for 3
seconds.
