English
7
1. Choose a desired location to fix the prep kit. (Fig. 6)
NOTE:
Keep min. 5'' (127mm) clearance around the prep
kit for easy hand locking and releasing the cooler.
5” (
12
7mm)
5” (
12
7mm)
5” (127mm)
5” (127mm)
Floor
Fig. 6
2. Set the prep kit on the desired location and use 4 screws
(with washers) that are appropriate for the weight of
cooler and its load to fix through the prep kit holes to the
floor. (Fig. 7)
Fig. 7
3. Place the Furrion eRove
TM
Cooler on the prep kit following
the markings on the prep kit. (Fig. 8)
Direction Marking
Fig. 8
4. To lock the eRove
TM
Cooler, flip up the latches until they
click into place. (Fig. 9)
Fig. 9
5. To unlock the eRove
TM
Cooler, pull up the latches and flip
outwards until they are unlocked. (Fig. 10)
Fig. 10
6. When the vehicle is in motion, tie down the cooler securely
with band on the RV floor for additional restraint. (Fig. 11)
Protection Foam
(not provided)
Fig. 11
NOTE:
Do not use the handle or accessory rail as a
restraining point.
Mounting the Cooler on Sliding Platform
A sliding platform can be fabricated to support the cooler for
easy storage and usage. Plan for a minimum 200lb (90kg)
cooler weight when considering loading scenario's for the
platform.
1. Use bolts, washers and nuts (not provided) for securing
the prep kit to the tray. Ensure the mounting location on
the prep kit aligns with a supporting member of the sliding
platform.
2. Extend sliding platform out entirely and check the
following:
−
Proper load support.
−
Clearance for opening and closing cold and dry
storage lids.
−
Wiring lengths and connection strains.
−
Access to locking latches.
3. Fix the cooler in RV sliding platform. (Fig. 12)
Fix with Wheel Kit
Fix with Mounting Base
Fig. 12
