English
6
Tie Downs
Restrain the
cooler
over the top with tie down straps (not
provided) when transporting to prevent tipping over, sliding,
or other hazards. (Fig. 1)
Protection Foam
(not provided)
Fig. 1
NOTE:
Do not use the handle or accessory rail as a
restraining point. Always include a protection foam over the
control panel in case of scratching while strapping the cooler.
Wheel Kit
A wheel kit base is available that can be attached securely
to the cooler and used for easy mobility. The wheel kit can
remain secured to the cooler when transported in your
vehicle if tied down properly.
1. See the separate quick start guide of the wheel kit to
assemble it.
2. Place the Furrion eRove
TM
Cooler on the wheel kit
following the instruction of direction markings on the
wheel kit. (Fig. 2)
Direction Marking
Fig. 2
3. To lock the eRove
TM
Cooler, flip up the latches until they
click into place. (Fig. 3)
Fig. 3
4. To unlock the eRove
TM
Cooler, flip up the latches and pull
outwards at the same time until they are unlocked. (Fig. 4)
Fig. 4
5. When the cooler with wheel kit is located in a moving
vehicle, tie down the cooler securely to prevent it from
tipping over, sliding or other hazards. (Fig. 5)
Protection Foam
(not provided)
Fig. 5
NOTE:
Do not use the handle or accessory rail as a
restraining point.
Mounting Base
Protection Foam
(not provided)
●
The cooler is designed to be fixed to a structure with the
prep kit.
●
Before mounting the base, have the prep kit separated
from the wheel kit by removing the wheels (if assembled)
and feet.
