FCO770 Users Guide Issue 1
Page 59
BATCH SETTINGS MENU
The FCO770 allows you to test in batches. When the required number of tested items has
been reached the instrument will display “BATCH COMPLETE” on the status line and stop
testing. A runtime screen shows batch counters and status. An electrical or pneumatic output
may be programmed to operate when the batch is complete.
If you do not test in batches set the batch quantity to zero.
The batch menu has ‘operator’ security status… see the security menu.
[RESET BATCH]
•
This resets the counters to zero and clears the Batch Complete status ready to start the
next batch. You will be prompted for confirmation. If you do not use batch control,
this may be used to simply reset the counters.
BATCH I/D
•
You may assign a text identification of up to 16 characters for the batch.
QUANTITY
•
Enter the batch size.
•
To disable batch control, set to zero - the batch size is then unlimited.
COUNT ON
•
The batch size may be for all items tested, or only items that passed the test.
•
Options: RESULT, PASS
AUTO START
•
This is normally only used for servicing or repeatability tests. Once the first test is
started, subsequent tests will automatically be started until the batch is complete or
Reset is pressed.
Summary of Contents for FCO770
Page 2: ......
