Funk-Electronic Piciorgros GmbH
RTU-810
V2.30 - Page 81 of 126
3.6.2
Contact table
Some PicoLogo blocks are sending messages to subscribers
via SMS (GSM/LTE option required) or IP, i.e. as SMTP trap
messages.
The receiver telephone numbers or IP addresses are initially
specified in the PicoLogo block. But in addition, these
addresses can be viewed and edited in the contact table.
3.6.2.1
Browse page
As only 10 entries are displayed per page, but the contact holds a maximum of 50
entries, the start index of each page can be entered here. A click on the "Browse" button
will reload the page with the selected index number as first entry.
3.6.2.2
Contact entries
Each subscriber number or IP address where a message is sent i.e. via SMS or SMTP
trap is initially defined in the PicoLogo block when the application is created:
