Funk-Electronic Piciorgros GmbH
RTU-810
V2.30 - Page 69 of 126
3.4.2
Email & SNMP
The RTU-810 can send out messages via eMail via a
PicoLogo application (i.e. Alarm messages).
To have this function working via the TextSend block, the
email sever where the mail is passed to, must be configured
in the RTU-810.
The RTU-810 can also send Logger events, cold start
messages and periodic alive messages to a syslog server via
SNMP trap.
3.4.2.1
Email setup
Sender address
This is the email address which is used in the "From:" field of the email and
in the email envelope during transmission to the email server.
AUTH username
This is the username which is used for SMTP authentication
AUTH password
This is the password which is used for SMTP authentication
SMTP server
address
This is the IP address of the server which handles outgoing mails. The server
must be reachable for the RTU-810, either via GSM/3G network or via
Ethernet connection.
SMTP AUTH
Enables SMTH AUTH to authenticate towards the email server
Mailserver port
The port on which the RTU-810 connects to the mail server. This is usually
the SMTP port 25 or the transmission port 587.
