background image

2

EN

Precautions

.

LASER SAFETY

This unit employs a laser. Only a qualified service person 
should remove the cover or attempt to service this device, due 
to possible eye injury. 

CAUTION: USE OF CONTROLS OR 

ADJUSTMENTS OR 
PERFORMANCE OF PROCEDURES 
OTHER THAN THOSE SPECIFIED 
HEREIN MAY RESULT IN 
HAZARDOUS RADIATION 
EXPOSURE.

CAUTION: VISIBLE LASER RADIATION WHEN 

OPEN AND INTERLOCK 
DEFEATED. AVOID EXPOSURE TO 
BEAM.

LOCATION:

• PRINTED ON THE BACK

IMPORTANT

• Use only discs marked DVD or disc with this DVD.
• Use only cassettes with the VHS mark with this VCR.

POWER SUPPLY

The main power supply is engaged when the main plug is 
plugged in a 220-240V, 50Hz AC outlet. To operate the unit, 
press 

FUNCTION

 to turn on the unit.

WARNING:LIVE PARTS INSIDE. 

DO NOT REMOVE ANY SCREWS.

DEW WARNING

Moisture condensation may occur inside the unit when it is 
moved from a cold place to a warm place, or after heating a 
cold room or under conditions of high humidity. Do not use 
the DVD/VCR at least for 2 hours until its inside is dry.

CAUTION

1)

Do not attempt to open the cabinet. There are no parts 
you can service inside. Refer all servicing to qualified 
service personnel.

2)

Slots and openings in the cabinet and the sides or bottom 
are provided for ventilation. To ensure reliable operation 
and to protect the unit from overheating, these openings 
must not be blocked or covered.
Avoid installation in enclosed spaces such as bookcases 
unless proper ventilation is provided.

3)

Keep the unit away from radiators and other heat sources.

4)

Avoid use near strong magnetic fields.

5)

Do not push objects of any kind into the DVD/VCR 
through the cabinet slots or openings as they could touch 
electrically live parts or short circuit parts resulting in a 
fire or electric shock.

6)

Never spill liquid on this unit. If liquid is spilled and 
penetrates into the unit, consult qualified service 
personnel.

7)

Use this unit in a horizontal (flat) position only.

8)

Before attempting to operate the unit, make sure that the 
timer recording mode is “OFF”.

9)

This product is in Stand-by mode when it turns off while 
the power cord is connected.

10)

Do not place any combustible objects on the device 
(candles, etc.).

Positioning

• Do not place the DVD/VCR directly on top of, or 

underneath, your TV set. Ensure that there is at least 20 cm 
between the DVD/VCR and the TV set, and that air can 
circulate freely through the ventilation openings of the 
DVD/VCR.

WARNING:TO REDUCE THE RISK OF FIRE OR 

ELECTRIC SHOCK, DO NOT 
EXPOSE THIS APPLIANCE TO 
RAIN OR MOISTURE.

CAUTION: TO REDUCE THE RISK OF 

ELECTRIC SHOCK, DO NOT 
REMOVE COVER (OR BACK). NO 
USER SERVICEABLE PARTS 
INSIDE. REFER SERVICING TO 
QUALIFIED SERVICE 
PERSONNEL.

The lightning flash with arrowhead symbol, 
within an equilateral triangle, is intended to 
alert the user to the presence of uninsulated 
“dangerous voltage” within the product’s 
enclosure that may be of sufficient magnitude 
to constitute a risk of electric shock to 
persons.

The exclamation point within an equilateral 
triangle is intended to alert the user to the 
presence of important operating and 
maintenance (servicing) instructions in the 
literature accompanying the appliance.

CAUTION

RISK OF ELECTRIC SHOCK 

DO NOT OPEN

CLASS 1 LASER PRODUCT
KLASSE 1 LASER PRODUKT
KLASS 1 LASER APPARAT
CLASSE 1 PRODUIT LASER

FUN_ H97L2BD(EN).fm  Page 2  Tuesday, July 27, 2004  6:06 PM

Summary of Contents for DBVR-5500





























Reviews: