background image

17

EN

Copying a Video Tape

Connect the recording DVD/VCR (this unit), playing VCR 
(another VCR) and your TV as outline in the following 
diagrams.

1)

Insert a pre-recorded videocassette into the playing VCR.

2)

Insert video cassette tape with its erase prevention tab in 
place into the cassette compartment of the recording 
DVD/VCR.

3)

Press 

SPEED/SYSTEM

 to select the desired recording 

speed (SP/LP).

4)

Select “AV2” or “AV3” position on the recording DVD/
VCR. 
See “External Input Mode (for VCR features)” (Refer to 
page 9).

5)

Press 

REC/OTR

 on the recording DVD/VCR.

6)

Begin playback of the tape in the playing VCR.

7)

To stop recording, press 

STOP/EJECT

 on the recording 

DVD/VCR, then stop playback of the tape in the playing 
VCR.

Note: •

For best results during dubbing, use the DVD/VCR’s 
front panel controls whenever possible. The remote 
control might affect the playing VCR's operation.

If video or colour fades in and out, you may be 
copying a copy guarded video tape.

Unauthorised recording of copyrighted materials may 
infringe on the rights of copyright owners, violate 
copyright laws and may not record clearly.

Status Display

To check the Counter, or Clock & Channel number, press 

DISPLAY

. Each time you press 

DISPLAY

, TV screen will 

change as illustrated:

When you select the channel using the 

number buttons

, select 

the desired channel (position number).

Note:

If the on screen display or indicators on the front panel 
show an abnormal reading or no reading, unplug this 
unit for 30 seconds, then replug it again.
Please note that clock and timer settings will be cleared 
after disconnection.

RF OUT

AERIAL

VCR

AV2 (DECODER)

DVD/VCR

AV1 (TV)

L

R

DVD

OPTICAL COAXIAL

DIGITAL

AUDIO OUT

ANALOG

AUDIO OUT

S-VIDEO

OUT

to 21-Pin Scart jack

to 21-Pin Scart jack

Playing VCR

(TV)

Recording DVD/VCR 
(this unit)

OPEN/CLOSE

CHANNEL

VCR

DVD

STOP

SKIP

REV

FWD

PLAY

OUTPUT

STANDBY-ON

REW

F.FWD

PLAY REC/OTR

STOP/EJECT

VIDEO

AUDIO

DISC IN

SKIP

Playing VCR

to the audio output jack

to 21-Pin Scart jack

(TV)

to the video output jack

Recording DVD/VCR (this unit)

to AV1 (TV) 
Scart jack on 
the back of the 
DVD/VCR

Using scart jacks

Using AV front terminals

SP

0:12:34

SP

17:40

P02

<CLOCK and CHANNEL

NUMBER mode>   

<COUNTER mode>

Press once.

Press once.

Press once.

<OFF mode>   

FUN_ H97L2BD(EN).fm  Page 17  Tuesday, July 27, 2004  6:06 PM

Summary of Contents for DBVR-5500





























Reviews: