13
EN
Slow Motion
• Press
SLOW
to reduce the playback speed. The DVD/VCR
mutes the sound during slow motion. You can control the
speed by pressing
g
(faster) or
h
(slower). Press
PLAY
to return to normal playback.
• If it is left in the Slow mode for more than 5 minutes, the
DVD/VCR will automatically switch to the Stop mode.
Recording
Viewing and Recording the Same Programme
1)
Insert a cassette tape with its erase-prevention tab in place.
(If necessary, rewind or fast forward the tape to the point
at which you want to begin recording.) Press
VCR
.
2)
Press the
number buttons
or
CH.
(
K
/
L
) to select the
channel to be recorded.
3)
Press
SPEED/SYSTEM
to select the tape speed (SP/LP).
4)
Press
REC/OTR
to begin recording.
•The REC/OTR indicator on the front panel comes on.
5)
Press
STOP
when recording is completed.
Two Different Tape Speeds
Before recording, select the tape speed : SP mode (Standard
Play) or LP mode (Long Play). The table below shows the
maximum recording/playback time using E-60, E-120, E-180
or E-240 tapes in each mode.
Skipping Unwanted Programme Material During
Recording
1)
Press
PAUSE
when you want to temporarily halt
recording.
You can check the remaining pause time with
C
marks on
the TV screen. Each
C
mark represents 1 minute. After 5
minutes, the DVD/VCR will automatically switch to the
Stop mode to prevent tape damage.
2)
Press
PAUSE
or
REC/OTR
to resume recording.
Recording One Programme While Viewing Another
You can record one programme while viewing another. To
start recording, follow steps
1)
to
4)
under “Viewing and
Recording the Same Programme”. Then, set the TV to the
channel you want to watch.
To Monitor the Progress of Your Recording
Select the video channel on the TV.
Assemble Function
• You can record in continuation from previous programme
on a pre-recorded tape.
1)
Insert a pre-recorded tape. Press
PLAY
to start playback.
2)
Press
PAUSE
at the desired point on the tape.
3)
Press
REC/OTR
. The DVD/VCR will be in the Recording
Pause mode.
4)
Press
CH.
(
K
/
L
) to select the channel to be recorded.
5)
Press
REC/OTR
or
PAUSE
. The recording will begin.
6)
Press
STOP
when recording is completed.
OTR (One Touch Recording)
This function enables you to set the duration of a recording
simply by pressing
REC/OTR
.
1)
Follow steps
1)
to
3)
in “Viewing and Recording the Same
Programme”.
2)
Press
REC/OTR
repeatedly until the desired recording
length appears in the upper left corner of the TV screen.
Recording stops when 0:00 is reached.
• To check time remaining during an OTR
Press
DISPLAY
.
• To change the recording length during an OTR
Press
REC/OTR
repeatedly until the desired length appears.
• To stop an OTR before recording is finished
Press
STOP
.
• To cancel the OTR but continue recording
Press
REC/OTR
repeatedly until “
I
” appears without the
recording length.
• If there is no timer recording set after an OTR, this unit
switches to DVD mode and
indicator flashes because
the VCR is still on standby for timer recordings. Press
T-SET
on the remote control or
STOP/EJECT
on the front
panel to cancel timer standby, then press
VCR
to use the
VCR again.
If there is a timer recording set after an OTR, this unit
switches to DVD mode and
indicator lights up,
indicating that this unit is on timer standby. Press
T-SET
on the remote control or
STOP/EJECT
on the front
panel to cancel timer standby, then press
VCR
to use the
VCR again.
Tape Type
Recording/Playback Time
Tape Speed
SP Mode
LP Mode
E-60
1 hour
2 hours
E-120
2 hours
4 hours
E-180
3 hours
6 hours
E-240
4 hours
8 hours
I
I
[0:30]
I
[1:00]...
I
[7:30]
I
[8:00]
(Normal (OTR:
recording) 30 minutes)
FUN_ H97L2BD(EN).fm Page 13 Tuesday, July 27, 2004 6:06 PM
