Full Spectrum Laser MUSE 3D Operation Manual Download Page 13

Page: 13 / 102

Technical Support is available 8am-5pm PST. Monday - Friday

[email protected]

•

702-802-3103

To secure the machine during shipping, yellow zip ties are used to hold the laser head assembly and

the x-gantry. These zip ties must be removed before operating your laser cutter for the first time.

1. Locate Yellow Zip Ties:

Yellow zip ties secures the laser head and x-gantry during shipping. Open

the lid and identify all yellow zip ties.

2 .Cut and Remove Yellow Zip Ties

: Using a small pair of scissors (nail cutters work remarkably well),

carefully cut and remove all yellow zip ties.

Section III.

Installation & Assembly

1. Locate & Remove Zip Ties

Do not cut any other cord or wire.

Be aware that the glass laser tube is

extremely fragile. Be careful NOT to damage any part of the machine during

this process.

NOTICE

Assembly Stage 1: Remove Zip Ties

Summary of Contents for MUSE 3D







































































































Search results

Summary of Contents for MUSE 3D

Reviews:

Related manuals for MUSE 3D

Brands by name

Popular brands

Full Spectrum Laser MUSE 3D, Operation Manual

Search results

Summary of Contents for MUSE 3D

Reviews:

Related manuals for MUSE 3D

Brands by name

Popular brands