RetinaEngrave v3.0 Software
Technical Support is available from 8am to 5pm (PST) M - F at [email protected].
47
SECTION VI. SOFTWARE
Using RetinaEngrave v3.0 Software
In this section you will be introduced to the major interface features of RetinaEngrave
v3.0.
Figure 6.1
Technical Support is available 8am-5pm PST. Monday - Friday
•
702-802-3103
50
Project Info
(H)
This window displays information regarding the active project.
Active Project Name:
Displays name of active project.
Modified:
Displays last date project was modified.
Job Time Estimate:
Displays estimated time until job is complete.
Unit:
Choose unit of measurement from the following
Pixels:
Sets unit of measurement to pixels. Centimeters: Sets unit of
measurement to centimeters.
Millimeters:
Sets unit of measurement to millimeters.
Inches:
Sets unit of measurement to inches.
Picas:
Sets unit of measurement to picas.
Points:
Sets unit of measurement to points.
Grid:
Toggles grid on/off/isometric.
On:
When “on” grid displays in workspace.
Off:
When off, grid does not display in workspace.
Isometric:
Toggles grid from squares to isometric grid.
Width:
Displays width of item according to chosen unit of measurement.
Height:
Displays height of item according to chosen unit of measurement
Window appears when vector file is detected and is used to input
vector settings.
Hide Window:
Click to hide vector engraving parameters window.
Show All Parameters:
Toggle to show or hide all parameters.
Change Position:
Drag with mouse to reorder any color.
Color Indicator:
Separates vector cuts with color indicators.
Speed:
Input speed settings.
Power:
Input power settings.
Current:
Input current settings.
Passes:
Input the number of passes for the laser.
Vector Engraving & Parameters
(G)
Summary of Contents for MUSE 3D
Page 1: ......
