Security functions
Configuring the fingerprint sensor
The
fi
ngerprint sensor is able to record the image of a
fi
ngerprint. With additional
fi
ngerprint
software, this image can then be processed and used instead of a password.
This function is used to authenticate information on the characteristics of a
fi
ngerprint
image. For this reason, users whose
fi
ngerprints have insuf
fi
cient characteristic
information may not be able to use
fi
ngerprint authentication.
To register a
fi
ngerprint, the
fi
nger must be scanned at least three
times. Use the same
fi
nger for registration.
To register your
fi
ngerprint or to authenticate yourself, proceed as follows:
►
Select
All Apps
and touch
Settings
.
►
Select
Security
and then
Fingerprint Settings
.
►
Align the top knuckle of your
fi
nger with the centre of the sensor, press your
fi
ngertip
gently against the sensor and pull it vertically over the entire sensor.
Hold your
fi
nger parallel to the surface of the Tablet PC to prevent authentication errors
through inaccurate
fi
nger position during registration and authentication.
The
fi
ngerprint authentication technology cannot guarantee complete identity
authentication/veri
fi
cation. Please note that Fujitsu does not accept any liability
for damage due to the use or non-availability of this product.
If the
fi
nger is moved too quickly or too slowly, the
fi
ngerprint cannot be detected correctly.
Registration/authentication of the thumbprint may be dif
fi
cult, as the centre of the
fi
ngerprint
coil pattern may not be centred or may be distorted. When scanning your thumbprint, ensure
that the centre of the coil pattern is in the centre of the
fi
ngerprint sensor.
If the
fi
ngerprint is not scanned correctly, a warning message will be displayed.
If there is already a
fi
nger on the sensor at the start of the
fi
ngerprint registration or authentication
process, activation may not be available. Remove the
fi
nger from the
fi
ngerprint sensor and try again.
If the Tablet PC is connected via USB to a device that requires earthing, such as a desktop
PC, ensure that the device has already been earthed. If the device is not earthed,
fi
ngerprint
authentication may not be available. In this case, carry out
fi
ngerprint authentication while touching
a metal part (frame, socket, etc.) of the connected device, or disconnect the device.
Fujitsu
41
Summary of Contents for STYLISTIC M702
Page 1: ...System Operating manual STYLISTIC M702 ...
Page 3: ......
Page 10: ...Contents 6 Fujitsu ...