Working with the Tablet PC
NFC (Near Field Communication) and Android Beam
You can transfer the screen content directly by approaching the NFC
sensors of NFC-compatible devices.
Activating NFC and Android Beam
►
To use
Android Beam
,
fi
rst set the
Android Beam
function to
ON
.
►
Go to
All Apps
, select
Wireless & Networks – Next...
and activate
NFC
. Then select
Android Beam
and switch it to
ON
in the top right corner.
Android Beam
is not supported by some applications. The data that is sent or
received depends on the application.
Data transfer is not secure on all Tablet PCs equipped with
Android Beam
.
Transferring contents via NFC / Android Beam
►
Activate
Android Beam
on all systems.
►
Open a website or card which you wish to transfer to the other system.
►
Bring the NFC sensors on the two systems close to each other.
When the systems have detected each other, a signal will sound, the screen content of the
transmitting device will be zoomed out and a prompt to
Tap for transfer
will appear.
►
Tap on the screen content to transfer it to the other device.
The content of the transmitting device is transferred and appears on the
monitor of the receiving device.
When the battery is being charged, or if the Tablet PC is connected via the
micro USB port, NFC and Android Beam are not supported.
If the NFC mark cannot be scanned even with it held close to the compatible device,
lift the device slightly or move it forwards/backwards or left/right.
In some cases, the NFC sensor cannot be detected if there is a metal object
between the sensor and the compatible device. Please also note that a pocket or
cover for your Tablet PC can impair communication capabilities.
Fujitsu
33
Summary of Contents for STYLISTIC M702
Page 1: ...System Operating manual STYLISTIC M702 ...
Page 3: ......
Page 10: ...Contents 6 Fujitsu ...