Fujitsu ST4120P, User Manual

Page: 66 / 77

56
F u j i t s u S t y l i s t i c S T 4 1 2 0 P / 2 1 P Ta b l e t P C U s e r ’s G u i d e - S e c t i o n O n e
Checking the Connectivity
1. Click [Start] -> [Settings] -> [Control Panel].
2. Double-click the [PRISM Settings] icon.
[PRISM Wireless Settings] appears.
3. Check the connectivity on the [Link] tab. The
current condition of connection is displayed.
Table 7: Checking connectivity
Item
State
Current
Channel
Current Tx
Rate
[Radio
Off]/
[Radio On]
[Rescan]
button
Throughput
(Bytes/
sec)
Link
Quality
Signal
Strength
Description
Shows the current condition of
connection.
The MAC address of the other
computer to which you are
connected is displayed when the
connection is successful. If you are
connected to more than one
computer, the computer that has
the best connectivity is displayed.
Shows the current channel used
for the connection.
Shows the current transfer rate in
Mbits/sec.
Click [Radio Off] to disconnect.
Click [Radio On] to connect to the
network.
Click this button to search for
others to connect to.
Shows the actual transfer rate of
the data transfer for send (Tx) and
receive (Rx).
Shows either [Excellent], [Good],
[Fair], [Poor], or [Not Connected],
depending on the link quality.
Not shown for AdHoc connection.
Shows either [Excellent], [Good],
[Fair], [Poor], or [Not Connected],
depending on the signal strength.
Not shown for AdHoc connection.
Alb Passive 7(50-56) 25/3/03, 11:58 AM 56