Fujitsu ST4120P, User Manual, Page: 61 / 77

W i r e l e s s L A N U s e r ’s G u i d e
51
5. Click the [Encryption] tab.
6. Set the encryption items in accordance with
Table 2.
• AdHoc Network: Specify the same value for
all the computers for which the encryption
key is used for connection.
• Infrastructure Network: Specify the identical
encryption keys to the encryption keys set
for the access point. For instructions on
how to check the encryption keys set for
the access point, refer to the access point
manual.
Make sure that you specify the encryption
keys. If you do not specify the keys, any
computer with a wireless LAN card can be
connected. This presents a risk that your
data may be stolen or destroyed. Item
Description.
Item
Encryption
(WEP)
Create
Keys with
Passphrase
Passphrase
Create
Keys
Manually
(Hexadeci-
mal Input)
Description
Click the down arrow and
select an encryption option.
•
Disable: Disables the
encryption. In this case,
“Create keys with
Passphrase” and subsequent
items are greyed out, and
you cannot enter anything.
•
40 bit*: The encryption is set.
Select either “Create keys
with Passphrase”, “Create
keys manually”, or “ASCII
Input”, and enter the
encryption keys.
•
104 bit*: The encryption is
set. Select either “Create
keys with Passphrase”,
“Create keys manually”, or
“ASCII Input”, and enter the
encryption keys.
Not supported
Not supported
Select this to use hexadecimal
character codes to set the
encryption keys (Keys 1 - 4).
Enter a 10-digit value when you
have selected [40 bit]* for the
encryption.
Enter a 26-digit value when you
have selected [104 bit]* for
encryption.
Select if the network contains a
card that is set with the
encryption key using the
character code. Specify the
encryption keys with the same
value used for other wireless
LAN cards that are already set.
Alb Passive 7(50-56) 25/3/03, 11:58 AM 51