Fujitsu ST4120P, User Manual

Page: 64 / 77

54
F u j i t s u S t y l i s t i c S T 4 1 2 0 P / 2 1 P Ta b l e t P C U s e r ’s G u i d e - S e c t i o n O n e
5. Click [OK]. When a message appears
prompting you to restart the computer, click
[Yes].
Sharing
In this section, you set sharing of the drive,
folder, and printer.
You only need to set this when you are sharing
files or a printer with other computers on the
network.
When you share a drive, folder, or printer, you
can use them from any computer on the
network.
Setting [File and Printer Sharing for Microsoft
Networks]
1. Click [Start] -> [Settings] -> [Control Panel].
2. Double-click the [Network and Dial-up
Connections] icon. The [Network and Dial-up
Connections] windows appears.
Item
Full
Computer
Name
Workgroup
Description
A name to identify the computer on
the network. You can specify any
name to each computer.
For easier identification, use the
model name or user name.
A name for the network group:
•
AdHoc Network: Specify the
same name to all computers
within the same network.
• Infrastructure Network:
Specify a workgroup name to
connect to.
To change the setting, click
[Properties], and follow the instruc-
tions on the screen. [System
Properties] appears again.
Table 4: Checking computer name and
workgroup
3. Right click the [Local Area Connection], then
click [Properties] from the menu that appears.
[Local Area Connection Properties] appears.
4. If [File and Printer Sharing for Microsoft
Networks] is displayed in the list, make sure
that it is checked. If it is not checked, check it
and click [OK]. You do not have to perform the
following steps. Go to the next section,
entitled “Sharing Files.” If [File and Printer
Sharing for Microsoft Networks] is not found
in the list, click [Install], and perform Step 5
and subsequent steps. When you click
[Install], the [Select Network Component
Type] window appears.
5. Perform the following steps.
• Click [Service].
• Click [Add]. The [Select Network Service]
window appears.
6. Perform the following steps.
• Click [File and Printer Sharing for Microsoft
Networks].
• Click [OK]. You will go back to [Local Area
Connection Properties], and [File and Printer
Sharing for Microsoft Networks] is added to
the list.
7. Click [OK].
More than one network adapter is
installed in your system if more than one
[Local Area Connection] entry is
displayed. In this case, select the [Local
Area Connection] entry with [Intersil
PRISM Wireless LAN PCI Card] displayed
under [Device Name].
If you have changed the setting, [Close] is
shown instead. Click [Close].
Alb Passive 7(50-56) 25/3/03, 11:58 AM 54