How to Load Documents
32
How to Load Documents
Load documents in the ScanSnap in the following procedure.
For details about documents that can be loaded, refer to
"Documents for Scanning" (page 29)
.
1.
If you are loading multiple sheets, check the number of sheets.
The maximum number of sheets that can be loaded in the ScanSnap is as follows:
For A4 or smaller sizes: Up to 50 sheets can be loaded (with paper weight of 80g/m²
[20 lb] and thickness of the document stack under 5 mm).
2.
Fan the documents.
1. Hold both ends of the documents and fan them a few times.
2. Rotate the documents by 90 degrees and fan them in the same manner.
3.
Straighten the edges of the documents and slightly displace the top
edges at an angle.
If you try to scan more than the maximum amount that can be loaded, the following
problems may occur:
z
Files may not be properly created due to excessive file size.
z
Paper jams may occur.
Paper jams or damage to documents may occur if you scan the documents without
aligning the edges first.
Back
Bac
k
at an angle
Feed direction
