U41161-J-Z126-1-76
59
Standard processing in SVP mode
User frames and subframes
VM MODE ==>
Selection of the firmware to be loaded from SVP
1
NATIVE
for BS2000 operation
2
AVM/EX/EXS
for VM2000 operation
IPL EXECUTION ==>
IPL execution
1
ENABLE
executes IPL
2
DISABLE
does not execute IPL
If there are changes to the VM MODE and
IPL EXECUTION => 2
, only the other firmware is
loaded and no IPL is executed.
Special key functions
Sets operating mode. If a loading function has previously been stored in PROGRAM
LOAD FRAME: DETAIL-1 with the
key, an IPL with the set parameters is
executed.
Ê
After selecting the firmware to be loaded in the
VM MODE ==>
field and entering
2
in the
IPL EXECUTION ==>
field, press
.
The following prompt will then appear:
The operating mode must not be reset during system operation! If this
instruction is not heeded, BS2000 will be shut down.
Ê
Press
to reload the firmware, or
to cancel the procedure. Confirm your
input with
.
Ê
After reloading the firmware, press the
key to carry out IPL in PROGRAM
LOAD FRAME: DETAIL-1.
Switches to PROGRAM LOAD FRAME: BASIC (page 54)
Switches to PROGRAM LOAD FRAME: DETAIL-1 (page 55) and stores the set
parameters.
Initial program loading is possible in PROGRAM LOAD FRAME: DETAIL-1 after
completing this frame and pressing the
key.
ENTER
P9
ENTER
***********************************
* *
* ARE YOU SURE ? (ENTER Y OR N) N *
* *
***********************************
!
Y
N
ENTER
P9
P3
P9
ENTER
Summary of Contents for S140
