Fujitsu S140, User Manual

Page: 62 / 115

62
U41161-J-Z126-1-76
User frames and subframes Standard processing in SVP mode
6.4.4 (MA) MANUAL OPERATION FRAME
Figure 29: MANUAL OPERATION FRAME screen
By making an entry in this frame and pressing , you can execute various manual
operations.
Instructions on this frame are only executed when the CPU has been stopped
(see message in frame line 23). The CPU status is displayed in line 22.
Ê
Selection of a CPU with the key.
Ê
Stopping of the selected CPU (see (ML) MODE SELECTION FRAME page 51)
FUNCTION => The following function is executed after the corresponding charcacter
has been entered:
1 RATE CONTROL defines program operation
2 ADRS COMPARE STOP sets mode for compare address stop
3 FIRMWARE DUMP outputs a firmware dump to tape or to magnetic tape
cartridge (for service only)
4 HSA DUMP executes HSA dump (for service only)
(HSA = Hardware/Software Area)
X EXECUTE executes functions 1 - 4
----- MANUAL OPERATION FRAME ----- E40L01G
FUNCTION=> ADDRESS COMPARE STOP
ADRS TYPE=>
*1 RATE CONTROL RATE CONTROL=> *1 ABSOLUTE
*1 PROCESS *2 LOGICAL
*2 ADRS COMPARE STOP *2 I-STEP
ADRS COMP SELECT=>
*3 FIRMWARE DUMP *1 ANY
*2 OPERAND FETCH(OFETCH)
*4 HSA DUMP *3 OPERAND STORE(OSTORE)
UNIT ADRS=> 0000 *4 INSTRUCTION ADRS(IA)
*X EXECUTE *5 IA & OFETCH
*6 OFETCH & OSTORE
ADRS SET=> XXXX
=> XXXXXXXX
ADRS COMP MODE=>
*1 RESET
*2 SET
*3 NORMAL
CL-0 CPU-0 CHP-0 RUN
E2M31 CPU NOT IN STOPPED STATE M
FLAG CODE = D90557 W 00000V00
RA M []-[]00
ENTER
P16