Fujitsu S140, User Manual, Page: 48 / 115

48
U41161-J-Z126-1-76
Using frames Standard processing in SVP mode
PF 7 Page up The previous screen contents are displayed.
PF 8 Page down The next screen contents are displayed.
PF 9 Frame-specific function is executed.
PF 10 Frame-specific function is executed.
PF 11 Frame-specific function is executed.
PF 12 Frame-specific function is executed.
PF 13 Recall Previous SVP commands are displayed in the
command line; they can then be executed again with
changed operands.
PF 14 Frame-specific function is executed.
PF 15 Frame-specific function is executed.
PF 16 Change CPU Selects the CPU for which the following commands are
valid. This CPU is then logically connected to the SVP.
PF 17 not assigned.
PF 18 Step Executes the next command if the S140 is in Single
Cycle Instruction Mode.
PF 19 ARMSS control Changes the user rights of an existing ARMSS
connection.
PF 20 Stop only in CE mode : stops the selected CPU
PF 21 Start Starts the selected CPU
PF 22 not assigned
PF 23 Mode Select – Switches to the MODE SELECTION FRAME.
– Erases WRITE-CONSOL message on the screen
(e.g.
SHUTDOWN COMPLETED ).
– Erases BEL display in screen line 25
PF 24 Mode Change Switches back and forth between FJ-PROGRAM
FRAME and SVP FRAME
(for service only if appropriate settings apply).
K . . Name Function
Cancel /
Reset Cancel input
Reset key
Refresh /
Clear The last displayed frame is re-displayed.
All other previous inputs in the current frame are reset.
PF . . P . . Name Function
P7
P8
P9
P10
P11
P12
P13
P14
P15
P16
P17
P18
P19
P20
F1
F2
F3
K3
K1
K2