Fujitsu S120 Series, Operating Manual

Page: 26 / 109

26
U41182-J-Z126-1-74
Automatic switching on/off of the S120 via the SKP Switching on and off
The “Switching on / off the host” form is displayed:
Figure 14: Form „Switching on / off the host“
By using the (
CHOICES
) to enter YES for the two questions at the top of the window,
you can specify
–
whether the S120 should be switched on automatically if the 3970-SKP is switched
on or SINIX is started on the 3970-SKP, and
– whether the S120 should be automatically switched off if the SINIX system is shut
down or the 3970-SKP is switched off.
Ê Press the (
SAVE
) key after filling out the form.
However, it is only switched off automatically if the SINIX system is shut down using
shutdown . If it is shut down and restarted using shutdown -i6
,
no switching action is
carried out.
Configuring the automatic deactivation may have unforeseen consequences, since
switching off the 3970-SKP without thinking about it properly (e.g. for maintenance
work) also causes the S120 to be switched off.
We recommend shutting down the system manually at the required times, switching
off the S120 via the AU4 frame (see page 70) or using the sysadm form described
above (bottom query), and then switching off the 3970-SKP.
P2
P3
!