Fujitsu S120 Series, Operating Manual

Page: 46 / 109

46
U41182-J-Z126-1-74
Using frames Standard processing in SVP mode
6.3.2 Switching between user frames
A switch between the user frames is only possible within a specified scheme or via an FR
command.
The possible switches between the frames are illustrated below:
Figure 24: Switching between the frames
Explanation of Figure 24
The frames are represented by this symbol:
Each frame has an ID consisting of two letters derived from the frame name. In the
above example the MODE SELECTION FRAME is also shown with the ID ML.
Arrows and program function keys show where and with which key or combination of
keys you can switch to a frame.
ML MODE SELECTION FRAME
LD PROGRAM LOAD FRAME
ST STATUS DISPLAY FRAME
AD ALTER/DISPLAY FRAME
MA MANUAL OPERATION FRAME
ME MESSAGE FRAME
CH CH/SUBCH STATUS DISPLAY FRAME
1 REAL CLOCK
AU AUXILIARY FRAME: MENU
2 IORSF CONTROL
3 RELATED SCB’S
5 LOAD PRESET
4 POWER STAND-BY/IMPL
MF MAINTENANCE SUPPORT FRAME
FR command
PF23 / F3
PF3 / P3
PA PERFORMANCE ANALYSER
9 MEMORY RECONFIGURATION
8 HEAD CLEANING
Frame ID Frame name
MODE SELECTION FRAME ML