Fujitsu S120 Series, Operating Manual

Page: 53 / 109

U41182-J-Z126-1-74
53
Standard processing in SVP mode User frames and subframes
Before completing this frame check, whether the correct firmware for operating BS2000 or
VM2000 is loaded by the SVP. Information on this is provided in the DETAIL-2 STATUS.
DETAIL-2 STATUS
In this position the current settings of the PROGRAM LOAD FRAME:
DETAIL-2 are displayed.
If the settings are not correct, press the key to correct the entries in PROGRAM LOAD
FRAME: DETAIL-2. After correction and pressing the key the settings are stored and it
will be switched back to this frame (see page 55).
If the settings are correct, complete this frame and execute the IPL.
LOAD FUNCTION ==>
The following function is selected after the corresponding number has
been entered:
1 START AUTO executes IPL: automatic startup
2 START FAST executes IPL: fast startup
3 START DIAL executes IPL: dialog startup
4 START not used
5 SYSTEM DUMP executes SLED
6 LOAD CLEAR clears main memory before IPL
7 LOAD NON CLEAR does not clear main memory before IPL
IPL DEVICE ==> By entering the corresponding number in this field you can specify from
which device group an IPL is to be executed.
1 PRESET GROUP The first device address in this column is the device
from which an IPL is to be executed. The order and
number has been specified previously in (AU5)
AUXILIARY FRAME: LOAD PRESET-1.
If IPL is terminated normally, the device address list
is transferred from the PRESET GROUP to the
CURRENT GROUP.
important display
VM MODE: Loaded firmware
NATIVE for BS2000
AVM/EX/EXS for VM2000
P9
P9