manualshive.com logo in svg

Fujitsu Primergy TX300 S4, User Manual

Share
Download
Fujitsu Primergy TX300 S4 User Manual Download Page 6

6

　

„

PRIMERGY TX300 S4 model descriptions

PRIMERGY TX300 S4 has SAS model and SATA model. Herein, unless otherwise noted, these 
descriptions apply to both models. For descriptions unique to a given model, a model name is cited. 
Before reading this manual, check the "model label" attached to the following location on each server. 

Reference Information

„

Software manuals

Software Manual contains other reference information and cautions for ServerStart not described in this 
manual. Please read it before using ServerStart.
Software Manual is contained as a "README.TXT" file in the root directory on PRIMERGY Startup 
Disc. Use a text editor to read it.

„

Latest information about software provided with this server

For the latest information regarding ServerStart and other software provided with this server, refer to the 
Fujitsu PRIMERGY website (http://primergy.fujitsu.com).

Warning and Caution Labels 

Warning and caution labels are found on the server. 
Do not remove or stain these labels. 

SATA

SATA

 

model

model

SAS

SAS

 

model

model

䇭䇭㸡

䇭䇭㸡
䈬䈤䉌䈎

䈬䈤䉌䈎
䇭䇭㸣

䇭䇭㸣

䌛

Rack Type

䌝

Summary of Contents for Primergy TX300 S4





















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands