Fujitsu Primergy TX300 S4, User Manual

Page: 181 / 276

181
PRIMERGY TX300 S4 User's Guide
6
Attach the removed 5-inch storage bay rails to the internal device to be added.
Of the eight screws removed from the dummy unit when the 5-inch storage bay rails were
removed, use four metric threads to install the internal device.
7
Install the internal device to the 5-inch storage bay.
Insert the device into the bay until it clicks.
8
Connect the internal cable to the 5-inch internal device option.
The internal cables vary depending on the 5-inch internal device option.
For USB interface
1. Connect the power cable and the USB cable to the 5-inch internal device.
• For DAT72 unit
[Rear of DAT72 unit]
USB connector Power connector