Fujitsu Primergy TX300 S4, User Manual

Page: 196 / 276

196
Chapter 7 Configuring Hardware and Utilities
7.2.2 Main Menu
The [Main] menu appears when you start BIOS Setup Utility.
This menu is for setting time, date, and drives.
table: Main menu
Item Setting Description
System Time Present time The system time is set in "hours: minutes: seconds"
format. The hours should be based on a 24-hour clock.
For example, 6:30:00 P.M. is set as "18", "30", "00".
Note:
`
If a highly precise system time is necessary,
install a network synchronized time system
such as NTP.
System Date Present date The system date is set in "month: day: year" format.
For example, December 25, 2007 is set as "12", "25",
"2007".
Diskette A • None
• 360K
• 1.2M
• 720K
• 1.4M (Initial value) Sets the type of Floppy Disk Drive A (recording
density and drive size).
Standard IDE Sets the connected IDE device type and its operation mode.
J "7.2.3 Standard IDE Submenu" (pg.197)
Boot Options Configures the system startup settings.
J "7.2.4 Boot Options Submenu" (pg.198)
Base Memory Displays available base memory size less than 1 MB.
Extended Memory Displays available memory size larger than 1 MB.
System Time:
System Date:
Diskette A:
Standard IDE
Boot Options
Base Memory:
Extended Memory:
[HH:MM:SS]
<Tab>, <Shift-Tab>, or
<Enter>, selects field.
[MM:DD:YYYY]
[1.4M]
[DV-28S-V-(PM)]
640K
1022M
7