Fujitsu Primergy RX600 S2, User Manual

Page: 53 / 299

53
PRIMERGY RX600 S2 User’s Guide
2
Checkin
g before O
S
Inst
allatio
n
2.4 Preparation for Using ServerStart
on a Client Computer
When using the preconfiguration mode for setting installation information in advance
or when creating a driver disk using the FloppyBuilder function, install ServerStart on
the client computer.
●
System Requirements for Client Computers
Client computers must satisfy the following requirements.
2.4.1 Installing ServerStart
If a different version of ServerStart has been installed, uninstall it. The FloppyBuilder function or
installation wizard may not operate properly on a different version.
For details on how to uninstall ServerStart, refer to "2.4.2 Uninstalling ServerStart" ( pg.56).
1
Insert the ServerStart CD-ROM into the client computer.
The [ServerStart Launcher] window appears.
When the [ServerStart Launcher] window does not appear, execute "Launcher.exe" in the CD-
ROM.
2
Click [OK].
The Windows installer starts and the setup window appears.
Hardware
Personal computers operated with Windows NT, Windows XP Professional, or Windows
2000 Professional
(A CD-ROM drive and 10MB or more of free space are required.)
Software Microsoft® Internet Explorer 5.5 or later