Fujitsu Primergy RX600 S2 User Manual Download

Page: 56 / 299

Chapter 2 Checking before OS Installation

2.4.2 Uninstalling ServerStart

Perform the following procedures to uninstall ServerStart from the client computer.

Click [Start]

→

[Settings]

→

[Control Panel].

Double-click [Add or Remove Applications] ([Add or Remove Programs] on

some operating systems).

Select [Fujitsu ServerStart] and click [Remove] (or [Modify]).

When the uninstallation is executed successfully, Fujitsu ServerStart is deleted.

If [ServerStart - remote installation] has been installed using ServerStart, "FjPXEServer" seems

undeleted. Leave it and complete the operation.

On Windows 2000 Professional clients, "Add or Remove Applications" may become unable to respond

during uninstallation. If this occurs, log off the system.

Summary of Contents for Primergy RX600 S2












































































































































































































































































































Search results

Summary of Contents for Primergy RX600 S2

Reviews:

Related manuals for Primergy RX600 S2

Brands by name

Popular brands

Fujitsu Primergy RX600 S2, User Manual

Search results

Summary of Contents for Primergy RX600 S2

Reviews:

Related manuals for Primergy RX600 S2

Brands by name

Popular brands