Fujitsu Primergy RX600 S2, User Manual

Page: 224 / 299

224
Chapter 7 Installing Internal Options
11
Install the upper processor air baffle.
Insert the latches on the sides of the baffle into the sides of the server, and then insert the notches
on the front side of the baffle into the front of the server to install the cover.
Install the cable through the sides of the baffle. At this time, make sure that the cable is not
pinched.
12
Connect the cables which are removed in step 8 to the original positions.
13
Install the 5-inch internal device in the 5-inch storage bay.
To make it easier to connect the cables, do not slide the device all the way in.
The cable is passed sideward
of the air baffle.
The notches of the air baffle are
inserted in the tabs on a front
side of the server.
Insert the latches into
the sides of the server.
Notches
"Situation seen
from the back"
5-inch
Internal devices