Fujitsu Primergy RX600 S2 User Manual Download

Page: 86 / 299

Chapter 3 OS Installation Using ServerStart

Enter the file name and click [Save As].

Installation starts automatically.

• If a message prompting you to insert the Service Pack CD-ROM appears, insert the CD-ROM

and click [OK].

This message does not appear when Service Pack is not selected.

• If a message prompting you to insert the ServerView CD-ROM appears, insert the

PRIMERGY Document & Tool CD and click [OK]. This message does not appear when

ServerView will not be installed or the PRIMERGY Document & Tool CD has been inserted

already.

• If a message prompting you to insert the ServerStart CD-ROM appears, insert the CD-ROM

and click [OK].

When a message prompting you to insert the OS CD-ROM appears, insert the

CD-ROM and click [OK].

After files are copied, a message prompting you to insert the ServerStart CD-ROM appears.

Insert the ServerStart CD-ROM and click [OK].

The License Agreement window appears.

Click [I Agree].

After files are copied, a message prompting you to eject the CD-ROM and floppy disk appears.

Eject the CD-ROM and floppy disk and click [OK].

Then the system is restarted.

The system continues the installation operation after restart.

OS GUI setup, LAN utility installation, Service Pack installation, and Active Directory

installation are performed automatically.

When a confirmation message to restart appears, click [Restart].

The system restarts and installs high reliability tools.

Summary of Contents for Primergy RX600 S2












































































































































































































































































































Search results

Summary of Contents for Primergy RX600 S2

Reviews:

Related manuals for Primergy RX600 S2

Brands by name

Popular brands

Fujitsu Primergy RX600 S2, User Manual

Search results

Summary of Contents for Primergy RX600 S2

Reviews:

Related manuals for Primergy RX600 S2

Brands by name

Popular brands