Fujitsu Primergy RX600 S2 User Manual Download

Page: 85 / 299

PRIMERGY RX600 S2 User’s Guide

allation

sing ServerS

Set items and click [leave wizard].

The display returns to the expert mode window.

3.3.4 Application Wizard

Specify installation of supplied applications such as high reliability tools.

For details on the application wizard, refer to "3.1.6 Application Wizard" (

pg.71).

3.3.5 Start OS Installation

Install the OS to the server.

When the installation partition is not empty, a confirmation message appears. If it does not matter, click

[OK] to continue the installation procedure.

If an incorrect setting (such as the CD key) is found during installation, an error window will appear.

Enter the correct value in the window to continue the installation procedure. However, corrections

made here are not reflected to the configuration file.

Click [Click here, to Start the Installation of (OS)].

A confirmation window asking whether you want to save the current settings appears.

Click [Yes].

The following window appears.

Summary of Contents for Primergy RX600 S2












































































































































































































































































































Search results

Summary of Contents for Primergy RX600 S2

Reviews:

Related manuals for Primergy RX600 S2

Brands by name

Popular brands

Fujitsu Primergy RX600 S2, User Manual

Search results

Summary of Contents for Primergy RX600 S2

Reviews:

Related manuals for Primergy RX600 S2

Brands by name

Popular brands