Fujitsu Primergy RX600 S2 User Manual Download

Page: 83 / 299

PRIMERGY RX600 S2 User’s Guide

allation

sing ServerS

3.3.2 Disk Manager

Start up Disk Manager and format the installation partition.

Click [Use Disk Manager to partition and format your disk drives].

Disk Manager starts up.

Format the OS installation partition. Select the OS installation partition and click

the [Partition] menu

→

[Format].

The [Format Partition] window appears.

Be sure to specify the active partition on drive C.

Partitions equal to or larger than 4096MB cannot be FAT formatted.

Set items and click [Format].

The partition is formatted.

When the formatting is completed, click the [File] menu

→

[Exit].

Disk Manager closes and the display returns to the expert mode window.

Summary of Contents for Primergy RX600 S2












































































































































































































































































































Search results

Summary of Contents for Primergy RX600 S2

Reviews:

Related manuals for Primergy RX600 S2

Brands by name

Popular brands

Fujitsu Primergy RX600 S2, User Manual

Search results

Summary of Contents for Primergy RX600 S2

Reviews:

Related manuals for Primergy RX600 S2

Brands by name

Popular brands