Fujitsu Primergy RX600 S2 User Manual Download

Page: 5 / 299

PRIMERGY RX600 S2 User’s Guide

■

Server Types

Server types are described as follows.

Reference Information

■

Software Manuals

Software Manual contains other reference information and cautions for ServerStart not described in this

manual. Please read it before using ServerStart.

Software Manual is contained as a "README.TXT" file in the root directory on the ServerStart CD-

ROM. Use a text editor to read it.

■

Latest Information about Software Provided with This Server

For the latest information regarding ServerStart and other software provided with this server, refer to the

Fujitsu PRIMERGY website (http://primergy.fujitsu.com).

Warning and Caution Labels

Warning and caution labels are found on the server.

Do not remove or stain these labels.

table: Server Types

Type

Expressions and

abbreviations

Servers without an internal hard disk

Diskless Type

Summary of Contents for Primergy RX600 S2












































































































































































































































































































Search results

Summary of Contents for Primergy RX600 S2

Reviews:

Related manuals for Primergy RX600 S2

Brands by name

Popular brands

Fujitsu Primergy RX600 S2, User Manual

Search results

Summary of Contents for Primergy RX600 S2

Reviews:

Related manuals for Primergy RX600 S2

Brands by name

Popular brands