Fujitsu Primergy RX4770 M1, Upgrade And Maintenance Manual

Page: 83 / 332

RX4770 M1
Upgrade and Maintenance Manual 83
Basic software procedures
Ê
During boot, as soon as the Emulex BIOS utility option appears, press
[ALT]
+
[E]
or
[CTRL]
+
[E]
.
Ê
Under Emulex Adapters in the System you will find all available Emulex
adapters and their WWN addresses.
Ê
Note down the new 16-digit WWN address.
Ê
Press
[Esc]
to exit the Emulex BIOS utility.
Ê
Inform the customer about the changed WWN address.
QLogic FC adapters
Ê
Enable the network controller’s Option ROM in the system board BIOS as
described in section
"Enabling Option ROM scan" on page 71 .
Ê
Restart the server.
Ê
During boot, as soon as the QLogic BIOS utility option appears, press
[ALT]
+
[Q]
or
[CTRL]
+
[Q]
.
Ê
Under Select Host Adapter use the arrow keys
æ
/
Ë
to select the desired
FC / FCoE adapter and press
[Enter]
.
Ê
From the Fast!UTIL Options menu, select Configuration Settings , and press
[Enter]
.
Ê
From the Configuration Settings menu, select Adapter Settings , and press
[Enter]
.
Ê
Note down the new 16-digit WWN address found under Adapter Port Name .
Ê
Press
[Esc]
to return to the main menu and exit the QLogic BIOS utility.
Ê
Inform the customer about the changed WWN address.
5.2.16 Using the Chassis ID Prom Tool
The Chassis ID EPROM located on a dedicated Chassis ID board or on your
server’s front panel board contains system information like server name and
model, housing type, serial number and manufacturing data.
In order to integrate your system into the ServerView management environment
and to enable server installation using the ServerView Installation Manager,
system data needs to be complete and correct.