Fujitsu Primergy RX4770 M1, Upgrade And Maintenance Manual

Page: 54 / 332

54 Upgrade and Maintenance Manual
RX4770 M1
Basic hardware procedures
4.5.2 Mounting the server in the rack
4.5.2.1 Seating the server on the rack rails
V
CAUTION!
At least two people are needed to position the server on the rack rails.
(For the Japanese market, please refer to "
安全上のご注意
".)
Additionally, a lifter is required in the following cases:
– The server weighs more than 50 kg.
– The server weighs more than 21 kg and is to be installed above the
height of 25 U.
When using a lifter, this installation procedure needs to be carried out by
maintenance personnel.
I
Refer to the rack cabinet manuals for more detailed information on other
support systems.
For configurations below 32 kg:
At least two people are needed to lift the server
into the rack cabinet.
For configurations below 55 kg:
At least three people are needed to lift the server
into the rack cabinet.
For configurations above 55 kg:
At least four people are needed to lift the server
into the rack cabinet.