Fujitsu Primergy RX4770 M1, Upgrade And Maintenance Manual

Page: 308 / 332

308 Upgrade and Maintenance Manual
RX4770 M1
System board and components
Installing processors on the new system board
Ê
"Installing a processor" on page 233 .
Installing protective socket covers on the defective system board
I
Since the defective system board is sent back for repair, protect the
delicate processor socket springs with a socket cover.
14.5.4 Concluding steps
Ê
Reinstall all remaining system board components as shown in the related
sections:
– Heat sinks: see section "Installing processor heat sinks" on page 252
– Mid-brace: see section "Removing the mid-brace" on page 232
– Memory boards: see section "Installing a memory module" on page 222
I
Install all memory boards into their original slots.
– SAS Riser: see section "Installing the SAS riser" on page 152
– BMC Riser: see section "Installing the BMC riser" on page 156
– TPM (if applicable): see section "Installing the TPM" on page 288
– Expansion cards: see section "Installing expansion cards" on page 142
I
Install all expansion cards into their original slots.
Ê
"Reassembling" on page 53
Ê
If applicable, activate TPM functionality in the system BIOS under Security >
TPM (Security Chip) Setting
>
Security Chip
. For more information, refer to the
corresponding BIOS Setup Utility Reference Manual.
Ê
Reconnect all external cables.
Ê
"Connecting the server to the power source" on page 57
Ê
"Updating or recovering the system board BIOS and iRMC" on page 67
Ê
"Verifying system information backup / restore" on page 69
Ê
"Verifying the system time settings" on page 77