Fujitsu Primergy RX4770 M1, Upgrade And Maintenance Manual

Page: 66 / 332

66 Upgrade and Maintenance Manual
RX4770 M1
Basic software procedures
Concluding the procedure
Ê
After the update or diagnostic procedure has been completed, shut down the
server, reconnect all external I/O connections and bring the system back to
normal operation.
Ê
If necessary, perform this procedure for all remaining servers within the
Multipath environment.
5.1.6 Switching on the ID indicator
When working in a datacenter environment, switch on the ID indicator on the
front and rear connector panels of the server for easy identification.
I
For further information, refer to section "Locating the defective server" on
page 43 or to the "ServerView Suite Local Service Concept (LSC)" and
"Integrated Remote Management Controller" user guides.
Using the ID button on the front panel
Ê
Press the ID button on the front panel to switch on the system identification
LEDs.
I
For further information, refer to section "Connectors and indicators on
the front panel" on page 327 .
Using the iRMC web frontend
Ê
Enter the ServerView iRMC web frontend.
Ê
Under System Overview , click Identify LED On to switch on the ID indicators.
Using ServerView Operations Manager
Ê
In ServerView Operations Manager
Single System View
press the
Locate
button in the title bar to switch on the ID indicators.