manualshive.com logo in svg

Fujitsu Primergy RX100 S4, Operating Manual

Share
Download
Fujitsu Primergy RX100 S4 Operating Manual Download Page 39

RX100 S4

Operating manual

39

Hardware installation

Installing/removing the server in/from the rack

4.3.2

Installation in PRIMECENTER/DataCenter Rack

For installation in a PRIMECENTER/DataCenter Rack, the following parts are 
required:

– support bracket
– one left and one right telescopic rail (assembled) 
– M5x10 screws with integrated plugwashers

I

General information is provided in the Technical Manual for the PRIME-
CENTER and/or DataCenter Rack (see 

“Literature” on page 77

).

Fitting the support bracket

When mounting the left telescopic rail in the PRIMECENTER/DataCenter Rack, 
the supplied support bracket must first be mounted on the rear left support 
upright flush with the bottom edge of the device.

Figure 3: Fitting the support bracket

Ê

Position the support bracket at the corresponding height on the rear left 
support upright, (insert lug in corresponding hole) (1).

Ê

Secure the bracket with two screws incl. plug washers (2).

1

2

Summary of Contents for Primergy RX100 S4






















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands