Fujitsu primequest 2400E2 Design Manual Download Page 95

Page: 95 / 137

PRIMEQUEST 2000 Series Design Guide

3.3.4 HDD Configuration (3/5)



Software RAID

•

RHEL standard RAID function

For details, refer to "Linux (RHEL) Design Guide".

•

Mirroring with PRIMECLUSTER GDS is supported.

For details on support information, refer to
"Linux (RHEL) Design Guide".



Hardware RAID

•

Hard disk redundancy for disk units and SBs

•

A RAID card is included by default in a DU to support RAID configurations.

•

RAID0, RAID1, RAID1E, RAID5, RAID6, and RAID10 can be configured.

•

Hot swapping internal HDDs is supported (excluding RAID0 and non-mirror configurations).

•

RAID management tool "ServerView RAID Manager" is supported. (This tool is bundled with the

main server unit by default).

•

Hard disk redundancy on an external file unit

•

A RAID configuration can be created in the file unit on an external storage device (such as ETERNUS).

For details, refer to the manual for the file unit.

•

RAID0, RAID1, RAID1E, RAID5, RAID6, RAID10, RAID50, and RAID60 can be configured.

•

Hot swapping internal HDDs is supported (excluding RAID0 and non-mirror configurations).

•

RAID management tool "ServerView RAID Manager" is supported. (This tool is bundled with the

main server unit by default).

For details, refer to "SAS3 12 Gb/s MegaRAID® SAS Software User Guide" and "FUJITSU Software

ServerView Suite ServerView RAID Manager User Guide".



SAN Boot

An OS is started from a boot disk that is set in an external storage.

RAID CARD

HDD

Hardware RAID

GDS

HDD

Software RAID

Summary of Contents for primequest 2400E2







































































































































Search results

Summary of Contents for primequest 2400E2

Reviews:

Fujitsu primequest 2400E2, Design Manual, Page: 95 / 137

Search results

Summary of Contents for primequest 2400E2

Reviews: