Fujitsu primequest 2400E2 Design Manual Download Page 106

Page: 106 / 137

PRIMEQUEST 2000 Series Design Guide

3.4 Key Points for Cluster Configurations (2/4)



Cluster System Overview

•

A dedicated LAN for inter-node communication is used to connect between nodes.

•

Private network is used for Windows.

•

Cluster interconnect is used for Linux.

•

Inter-node communication is performed periodically to monitor for problems.

•

There are two types of cluster systems: inter-cabinet cluster and intra-cabinet

cluster.

For details, refer to "

3.4.1 Inter-Cabinet Cluster

" and "

3.4.2 Intra-Cabinet

Cluster

•

Windows

Clustering with Windows Server Failover Clustering (OS standard function) is

recommended.

* A server for Active Directory (AD server) is required separately.

•

RHEL

Clustering with PRIMECLUSTER is recommended.

105

Summary of Contents for primequest 2400E2







































































































































Search results

Summary of Contents for primequest 2400E2

Reviews:

Fujitsu primequest 2400E2, Design Manual, Page: 106 / 137

Search results

Summary of Contents for primequest 2400E2

Reviews: