Fujitsu primequest 2400E2 Design Manual Download Page 88

Page: 88 / 137

PRIMEQUEST 2000 Series Design Guide



Each physical partition is divided into smaller partitions.



Partitions are independent of each other. The hardware configuration and OS can be

different between the partitions.



The minimum division unit consists of one CPU core, 1GB of memory, and one I/O PCI card.



After the initial build, the configuration can be modified based on the operation condition.

Note: Memory Scale-up Boards can be used, however Dynamic Reconfiguration cannot be used.



Example: Physical integration of small-sized servers

Physical Partition#2

3.2.4 Configuration Example (G) - Extended Partitioning

IO unit

I ca

IO unit

I ca

Physical Partition#0

Physical Partition#1

IO unit

I ca

IO unit

I ca

Ext.Par.#0 Ext.Par.#1

PRIMEQUEST 2800E3

em
ory

Core

Ext.Par.

Ext.Par.#3

Core

Ext.Par.#5

Ext.Par.

Summary of Contents for primequest 2400E2







































































































































Search results

Summary of Contents for primequest 2400E2

Reviews:

Fujitsu primequest 2400E2, Design Manual, Page: 88 / 137

Search results

Summary of Contents for primequest 2400E2

Reviews: