Fujitsu primequest 2400E2 Design Manual Download Page 50

Page: 50 / 137

PRIMEQUEST 2000 Series Design Guide

2.5 Disk Unit (DU)

A unit in which internal storage is installed



Features

•

Up to two units can be installed in a cabinet.

•

Up to four 2.5-inch internal hard disk drives (HDDs) or

internal solid state drives (SAS-SSDs) can be installed

in a unit.

•

In RAID configurations, hot replacements can be performed for internal HDDs

and SAS-SSDs (excluding RAID0 and

non-mirror configurations).

•

RAID0, RAID1, RAID1E, RAID5, RAID6, and

RAID10 are supported.

•

A hot spare disk is supported.

•

Up to two RAID cards can be installed

in a unit.

Exp

Slot#

(

)

From

IOU#0/IOU#2

For details on RAID configurations,

refer to "

3.3.4 HDD Configuration

Example with one RAID Card

Example with two RAID Cards

Exp

Slot#

(

)

From

IOU#0/IOU#2

Exp

Slot#

(

)

From

IOU#1/IOU#3

Summary of Contents for primequest 2400E2







































































































































Search results

Summary of Contents for primequest 2400E2

Reviews:

Fujitsu primequest 2400E2, Design Manual, Page: 50 / 137

Search results

Summary of Contents for primequest 2400E2

Reviews: