118
U41261-J-Z816-4-76
CHAPTER 5 Internal I/O Units
5.3.3
Setting the OS
Before using a DDS4 DAT drive, modify the /kernel/drv/st.conf file as follows:
1
Copy the original st.conf file:
2
Add the following lines to the /kernel/drv/st.conf file:
4
There must be exactly six spaces between HP and C5683A. If another tape-
config-list has already been defined, use a comma “,” as a separator and add
the new lines as shown in the following example.
3
Shut down the system:
4
Reboot the system, using the -r flag:
# cp /kernel/drv/st.conf /kernel/drv/st.conf.old
tape-config-list =
"HP C5683A", "HP DDS4 4mm DAT", "HP_data2";
HP_data2 = 1,0x34,1024,0xd639,4,0x00,0x13,0x24,0x3,3;
Tape-config-list =
"EXABYTE EXB-8505", "Exabyte 8mm EXB-8505", "EXBT-
8SC",
"HP C5683A", "HP DDS4 4mm DAT", "HP_data2";
EXBT-8SC = 1,0x35,0,0xce39,2,0x15,0x8c,1;
HP_data2 =
1,0x34,1024,0xd639,4,0x00,0x13,0x24,0x3,3;
# shutdown -y -i0
ok boot -r
