Fujitsu PA03586-B205, Operator'S Manual

Page: 176 / 374

Using the ScanSnap in Various Ways (for Windows Users)
176
7.
Press the [Scan] button on the ScanSnap.
⇒
Scanning is started and the image data is output.
•
The image data scanned by using the [Scan] button is centered and output in the size
specified in [Output image size].
When [Automatic detection] is selected from the [Output image size] drop-down list on
the [Carrier Sheet Settings] dialog box, an optimal size is selected automatically from
the available standard sizes.
•
When [Automatic detection] is selected from the [Output image size] drop-down list on
the [Carrier Sheet Settings] dialog box, the size of the produced image data may be
smaller than the original, or parts may be lost.
Example: When you scan the A5 size image printed at the center of an A4 size
paper, A5 size image is output.
To output image data in the original size, specify the document size in the [Output
image size] drop-down list.
If the following symptoms are
observed, lay the material over a
piece of white paper to scan.
•
The output image data is not
in a suitable size (when
[Automatic detection] is
selected).
•
The outline of the document
is shaded.
•
Black lines appear around
the document cut out in an
indefinite shape.
Blank Page