manualshive.com logo in svg

Fujitsu LifeBook 200 Series, User Manual

The Fujitsu LifeBook 200 Series user manual is the perfect companion for your device. With easy-to-follow instructions and comprehensive information, this manual ensures seamless operation. Download it for free from our website and unlock the full potential of your LifeBook 200 Series.

Share
Download
background image

S e c t i o n   T w o

42

The PowerPanel icon looks like an atom with
its cloud of electrons. This icon will open the
PowerPanel menu. You can view the menu in
icon format along the edge of your desktop by
moving the cursor against the edge where you
have chosen to keep your PowerPanel toolbar
and letting it sit there until the toolbar appears.
(The default position for the toolbar is the left
side of the screen, but you can move it to
whichever edge you like by dragging.)

The power management toolbar has ten power
profile choices and six activation choices.
When you switch to AC powered operation the
PowerPanel toolbar will automatically change to
indicate AC power operation and will show the
AC Power profile as active.

The profiles are groups of system settings
designed to fit power operation to specific user
operating conditions. The activations are short-
cut ways to turn on specific power management
features of your notebook. Some of the profiles
can be edited and saved from the PowerPanel
application, some can be edited and saved from

the BIOS setup utility and only viewed from
PowerPanel,and some are factory set and can
only be viewed from either PowerPanel or the
BIOS setup utility.

The profile choices are:

(This group is factory set.)

■

Maximum Battery Life.

■

Maximum Performance.

■

Power Management Off.
(This one is set only from the 
BIOS setup utility.)

■

Custom Settings.

(This group is set from PowerPanel.)

■

Presentation.

■

Green PC.

■

AC Profile.

■

Word Processing.

■

Communication.

■

Games.

The activation choices are:

■

System Suspend.

■

System Save-to-Disk.

■

System Standby.

■

Hard Disk Standby.

■

Modem Power Toggle.

■

Video Standby.

The factory set Maximum Power Savings profile 
is designed around trade offs of performance
and battery life. For truly maximum battery life
keep the display and volume levels as low as
possible and use the custom settings recom-
mended in Section Three on page 100.

P O I N T

The AC Power profile is activated auto-
matically when a power adapter is being
used, unless it is overridden by another
selection made after the adapter became
active. It can be reactivated by selecting
it or it can be activated by selection, even
when operating only on battery power.

Summary of Contents for LifeBook 200 Series












































































































































































































Reviews:

No comments

Related manuals for LifeBook 200 Series

IBM 5100 Basic Reference Manual preview
5100
Brand: IBM Pages: 187
IBM 5100 Maintenance Information Manual preview
5100
Brand: IBM Pages: 389
Panasonic Toughbook CF-19KHRAG2M Reference Manual preview
Toughbook CF-19KHRAG2M
Brand: Panasonic Pages: 91
Atrust mt168W Quick Start Manual preview
mt168W
Brand: Atrust Pages: 2
Everex StepNote XT Series Quick Setup Manual preview
StepNote XT Series
Brand: Everex Pages: 4
Hypertec IN-CRKTCLHY Brochure & Specs preview
IN-CRKTCLHY
Brand: Hypertec Pages: 1
Oregon Scientific B-Book Learning Laptop Instruction preview
B-Book Learning Laptop
Brand: Oregon Scientific Pages: 28
LEXIBOOK Fairies Magic JC262i1 Instruction Manual preview
Fairies Magic JC262i1
Brand: LEXIBOOK Pages: 32
Dell Inspiron 120L Service Manual preview
Inspiron 120L
Brand: Dell Pages: 42
Dell Inspiron 1121 Service Manual preview
Inspiron 1121
Brand: Dell Pages: 54
Dell Inspiron 1150 Service Manual preview
Inspiron 1150
Brand: Dell Pages: 62
Dell Inspiron 1120 Service Manual preview
Inspiron 1120
Brand: Dell Pages: 54
Dell Inspiron 1122 Service Manual preview
Inspiron 1122
Brand: Dell Pages: 42
Dell Inspiron 11-3147 2-in-1 Owner'S Manual preview
Inspiron 11-3147 2-in-1
Brand: Dell Pages: 79
Dell Inspiron 1200 Owner'S Manual preview
Inspiron 1200
Brand: Dell Pages: 164
Dell Inspiron 120L Specifications preview
Inspiron 120L
Brand: Dell Pages: 2
Dell Inspiron M531R Specifications preview
Inspiron M531R
Brand: Dell Pages: 1
Dell Latitude 7200 2-in-1 Service Manual preview
Latitude 7200 2-in-1
Brand: Dell Pages: 101

Brands by name

Popular brands

Load more brands