Fujitsu LifeBook 200 Series, User Manual

Page: 131 / 203

U s e r I n s t a l l a b l e F e a t u r e s
L i f e B o o k 2 0 0 S e r i e s f r o m F u j i t s u
121
Figure 4-9 Floppy Disk Drive
C A U T I O N
The floppy disk drive must be installed or
removed with the power off.
C A U T I O N
The bridge battery can not support an
active notebook. The notebook must be
in Suspend mode.
Batteries should be removed and stored sepa-
rately in a cool dry place if your notebook is
not going to be used for an extended period
of time.
Under federal,state or local law it may be illegal
to dispose of batteries by putting them in the
trash.Please take care of our environment and
dispose of batteries properly. Check with your
local government authority for details regarding
recycling or disposing of your old battery, or
contact your support representative at 1-800-
8FUJITSU (1-800-838-5487).
Floppy Disk Drive
The floppy disk drive can be installed in either
Multi-function Bay. In Bay 1 install directly, or in
Bay 2 install in the Bay Adapter first. In addition,
an optional external floppy disk drive may be
purchased to use when both Multi-function bays
are needed for other uses. (For information on the
care and use of floppy disk drives see Floppy Disk
Drive in Section Two on pages 34-36. To install an
external floppy disk drive see External Installation
of a Floppy Disk Drive on page 107.)
PC CARDS
PC Cards perform a wide varie ty of functions,
and are ideal for mobile computers.
Some available PC Cards:
■
Fax/data modem cards (Type II).
■
Local area network (LAN) cards (Type II).
■
Wireless LAN cards (Type II).
■
1MB and 2MB static RAM (SRAM) cards
(Type I).
■
IDE solid-state disk cards (Type II).
■
SCSI cards (Type II).
■
Zoomed Video cards (Type II, Slot 1 only).
■
ATA cards (Type III).
■
Other PC Cards that conform to PCMCIA
2.1 or CardBus standards.
For further information, refer to the instruc-
tions supplied with your PC Card.