background image

S e c t i o n   T w o

36

C A U T I O N

Formatting a previously used floppy
disk is an effective method of clearing a
disk as long as you realize that ALL the
information on the disk will be erased.

Never store a floppy disk near a magnet or
magnetic field.

To clean, wipe the floppy disk drive clean
with a dry soft cloth or with a soft cloth
dampened with water or a solution of neutral
detergent. Never use benzene,paint thinner,
or other volatile material.

Never disassemble or dismantle your floppy
disk drive.

CD-ROM DRIVE

The modular CD-ROM drive is a 20-speed
maximum modular reader.

C A U T I O N

Do not operate your CD-ROM drive
unless your notebook is sitting on a 
flat surface and the adjustment feet
are folded against the bottom of the
notebook. Using a CD when the drive
is not level may damage the drive or
prevent proper operation.

Care of Floppy Disk Drives and Disks

Avoid storing the floppy disk drive and
disks in extremely hot and cold locations,
or in locations subject to severe
temperature changes.

Keep the floppy disk drive and disks
out of direct sunlight and away from
heating equipment.

Avoid storing the floppy disk drive in
locations subject to shock and vibration.

Avoid using the floppy disk drive and disks 
in damp and dusty locations.

Never use the floppy disk drive with any
liquid,metal, or other foreign matter inside
the floppy disk drive or disk.

Figure 2-12 Loading the CD-ROM Tray

Summary of Contents for LifeBook 200 Series












































































































































































































Reviews: