Fujitsu fi-7140 Operator'S Manual Download

Page: 92 / 182

Appendix

Chapter 7 Troubleshooting

How to Load
Documents

How to Use the
Operator Panel

Various Ways to
Scan

Daily Care

Operational
Settings

Replacing the
Consumables

Scanner
Overview

Troubleshooting

When your document is jammed inside the scanner, remove
the document in the following procedure.

Remove all documents from the ADF paper chute
(feeder).

Open the ADF.

For details, refer to

"1.4 Opening/Closing the ADF" (page 25)

Remove the jammed document.

Close the ADF.

For details, refer to

"1.4 Opening/Closing the ADF" (page 25)

7.1 Paper Jam



Do not use force to pull out the jammed
document, and make sure to open the ADF first.



Be careful not to touch any sharp parts upon
removing jammed documents.



Be careful not to get things such as hair, a tie or
necklaces caught inside the scanner.



The inside of the ADF may become extremely
hot during operation.

When the ADF is open, it might close
accidentally. Be careful not to get your fingers
caught.

ATTENTION



Make sure to check the documents and the paper path
thoroughly. Remove any metal objects such as staples or paper
clips to prevent paper jams.



Be careful not to damage the glass surface and the guides
when removing documents with metal objects such as staples
or paper clips.

Be careful not to get your fingers caught when
closing the ADF.

Summary of Contents for fi-7140























































































































































































Search results

Summary of Contents for fi-7140

Reviews:

Related manuals for fi-7140

Brands by name

Popular brands

Fujitsu fi-7140, Operator'S Manual

Search results

Summary of Contents for fi-7140

Reviews:

Related manuals for fi-7140

Brands by name

Popular brands