Chapter 7 Troubleshooting
106
Images are distorted or not clear.
ADF:
Are the glass and rollers inside the ADF clean?
Flatbed (fi-7240):
Is the document pad or the document bed clean?
No
Perform cleaning.
For details, refer to
"Chapter 5 Daily Care" (page 72)
Yes
Is the ADF being pushed down during scanning? Or is
there a heavy object on top of the ADF?
Yes
Do not push down the top of the ADF, or place any heavy objects on the ADF
during scanning.
No
Is a scan performed on a place that is unstable or
vibrates?
Yes
Perform a scan on a place that is stable and does not vibrate.
No
Is the scanner placed on a flat, level surface? Are the
rubber pads attached on the bottom of the scanner?
No
Either place the scanner on a flat and level surface, or attach the rubber pads on
the bottom of the scanner.
Yes
Are there any wrinkles or curls on the document?
Yes
Smooth out the wrinkles or curls on the document.
No
If the problem persists, check the items in
"7.4 Before You Contact the Scanner
first, then contact your FUJITSU scanner dealer or
an authorized FUJITSU scanner service provider.
