Release Information
FUJITSU Storage ETERNUS Multipath Driver V2 User’s Guide for Linux
Copyright 2014 FUJITSU LIMITED
P2U3-0031-15ENZ0
16
■
V2.0L23 modifications
●
Modification outline
Added syslog messages and changed the output timing of syslog messages that are output when starting
up a Red Hat Enterprise Linux 5 or SUSE Linux Enterprise Server 10 system.
-
Modification target
Multipath Driver
-
Modification details
-
Modification effect
When performing message monitoring, the newly added message may not be monitored as intended.
Note that this change does not affect the message monitoring function with Fujitsu middleware.
Version
Modification details
V2.0L22 or earlier
The following syslog messages are sequentially output during system startup:
Note that the following syslog message is output when path redundancy is maintained
regardless of whether the path is recognized or not.
V2.0L23
The following syslog messages are sequentially output during system startup:
Note that the following syslog message is output when path redundancy is maintained
and all the paths are recognized.
MPDH%d: NOTICE: %s: Device configuration succeeded.
MPDH%d: WARNING: %s: Device configuration is without
redundancy.
MPDH%d: NOTICE: %s: Device configuration is without
CFL redundancy.
All paths connect to (RT%x, RT%x).
MPDH%d: NOTICE: %s: Device configuration is without
CFL redundancy.
All paths connect to (CM%x, CM%x).
MPDH%d: NOTICE: %s: Device configuration succeeded.
MPDH%d: NOTICE: %s: Device configuration succeeded.
MPDH%d: WARNING: %s: Device configuration is without
redundancy.
MPDH%d: NOTICE: %s: Device configuration is without
CFL redundancy.
All paths connect to (RT%x, RT%x).
MPDH%d: NOTICE: %s: Device configuration is without
CFL redundancy.
All paths connect to (CM%x, CM%x).
MPDH%d: WARNING: %s: This path was unrecognizable.
MPDH%d: NOTICE: %s: Device configuration succeeded.
